Dry floor system TBS-30
The Multitherm floor heating system drywall TBS-30 is characterized by low density and low height. TBS-30 is suitable for new building, old building and restoration measures.
Floor construction:
1. TBS-30 system boards
2. Multitherm floor heating pipes (PE-RT)
3. Heat-conducting
4. Dry screed slabs
5. Tiling
6. Wood
7. Carpet
TBS-30 system board
Head - and middle panels are identical
| Dimensions: | 1000 x 500 x 30 mm |
| Pipe diameter: | 16 mm |
| Pipe distance: | 125 mm |
| Material: | PS 30 |
Heat transfer plate
galvanizedsheet steel
| Dimensions: | 980 x 120 x 0,5 mm |
| Perforation / distance: | 300mm |
Installation instructions:
- The TBS-30 system boards are starting on a level subfloor, from a corner, laid.
- The relocation of the heat conducting plates is determined according to the laying interval on the TBS-30 system boards.
- Laying of Multitherm PE-RT floor heating pipes in the dimension 16 mm.
- Due to the heat conducting the complete transmission-heating surface is covered.
- As a separating layer corresponding polyethylene foil is placed.
- For load distribution dry screed plates are installed according to DIN 18560.
- Layer serving as a floor tile, wood, carpet or anything else