Underfloor heating pipe

• Water-conducting inner pipe PE-RT (polyethylene raised-temperature) using up

  to +95°C at 3.5 bar operating pressure

• Diffusion through two-layered sealing sheath made of special plastics;
  TGM K test number 15718/1
• According to E-DIN 16833 / 16834 or DIN 4721, EN ISO 22391
• Is according to ÖNORM B 5159 and DIN 4726 at an oxygen diffusion current
  of 0.10 gm-3, at 40°C, the tube refers to “oxygen tight”
• Achieve a test value of the oxygen diffusion current of 0.039 gm-3, at 40°C. The tube as absolutely "oxygen tight" seen

Specifications:

• Field of Use: up to +95°C at 3.5
• Density: 0.936 g.m-3
• Tensile strength: 24 N/mm²
• Elongation at break: 770%
• Dielectric strength: up to -60°C.
• Modulus of elasticity: 710 mm²
• Bending radius: 20°C - 14 d
• High stabilized (oxidation – metal deactivation)

• Continuous load at 95°C and 3.5 bar
• Short-term temperature exposure of 110°C in the unfortunate occurrences have no negative impact on the utility value.
• High flexibility, therefore, to move without preheating.
• Welded (no mechanical coupling in the floor).
• Continuous quality control

• No cold feet because of the heat pad is where it should be, to the body and not on the ceiling.
• The heating system doesn’t disperse any dirt on a hot radiator.
• No irritation of the nasal mucous membranes, as higher relative humidity.
• No dirty wallpaper, curtains, carpets, etc.

 

 

 

Suitable for every floor covering

 

Now, even in residential areas attractive and easy-care ceramic floor coverings are used, because Multitherm-floor heating systems provide a high level of comfort.