DRYFLOOR SYSTEM
TBS-30

The Multitherm Radiant Dryfloor Heating System TBS-30 characteristics a small volume weight and a low construction height. TBS-30 is suitable for new building, rebuilding and redevlopement of buildings.
 

Floor construction

1. TBS-30 System plate
2. Multitherm underfloor heating pipe (PE-RT / DD)
3. TBS-30 Heat guide sheet-steel
4. Dryfloor clay plate
5. Lay tile
6. Wood / Timber
7. Fitted carpet

TBS-30 System plate
Head and middle plate are identical

TBS-30 Heat guide sheet-steel
from zinc sheet-steel

Dimension
Pipe diameter
Installation distance
Material

1000 x 500 x 30 mm
16 / 17mm
125 mm
PS 30

Dimension
Breaking groove

980 x 120 x 0,5mm
Distance 300mm

Installation Instructions

• The TBS-30 System plates are placed on an even floor starting from a corner.
• The placement of the Heat guide sheet-steel is given according to the installation distance grooves at the TBS-30 system plates.
• Placement of the Multitherm PE-RT / DD underfloor-heating pipe in the proper dimension 16 / 17mm.
• The TBS-30 Heat guide sheet-steel will cover the whole heat transmission area.
• A separation layer placed as a proper Polyethylene foil.
• For equalization of burdens place dryfloor plates according to DIN 18560.
• As floor cover serve lay tile-, wood-, fitted carpet floor and others.